Supercooling Behavior in the Melt Crystallization Process of Ammonium Dinitramide (ADN) and Corresponding Regulation Strategy

Abstract

Melt prilling, based on melt crystallization, is a crucial technique for mitigating the hygroscopicity of the green energetic oxidizer ammonium dinitramide (ADN). However, the inherent supercooling properties of ADN result in the formation of supercooling-related defects and rough surfaces during the melt prilling process, ultimately compromising product quality. Consequently, effective regulation of ADN melt crystallization behavior to reduce supercooling is urgently needed. Herein, a novel strategy for reducing ADN supercooling using dihydroxylammonium 5,5’-bistetrazole-1,1’-diolate (TKX-50) as a nucleating agent is reported. TKX-50 modulates the melt crystallization process of ADN by providing heterogeneous nucleation sites, which decrease the supercooling degree from 66.5 °C to 7.5 °C. Meanwhile, the incorporation of TKX-50 significantly enhances the crystallization quality of ADN, improving its anti-hygroscopic performance by 19% and increasing particle hardness by over 20%. Crystallization kinetics analysis indicates that TKX-50 reduces the nucleation energy barrier, accelerates the ordered arrangement of ADN molecules, and thus effectively suppress supercooling. This study develops a rational strategy for regulating the supercooling behavior in ADN melt crystallization, addressing the limitations of current melt prilling for ADN

Supplementary files

Article information

Article type
Paper
Submitted
15 Feb 2026
Accepted
24 Mar 2026
First published
25 Mar 2026

CrystEngComm, 2026, Accepted Manuscript

Supercooling Behavior in the Melt Crystallization Process of Ammonium Dinitramide (ADN) and Corresponding Regulation Strategy

Z. Xing, K. Liang, Y. Liu, Y. Wu, Z. Yue and Y. Wang, CrystEngComm, 2026, Accepted Manuscript , DOI: 10.1039/D6CE00142D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements