Fabrication and characterization of a multifunctional alginate–gelatin–fibrinogen hydrogel for potential muscle tissue reconfiguration in vitro

Abstract

In recent years, Matrigel–fibrinogen–thrombin (MFT) hydrogels have gained prominence in muscle tissue regeneration and biohybrid robotics owing to their remarkable bioactivity. Nevertheless, addressing their disadvantages—the instability of Matrigel, inadequate mechanical strength, complex fabrication processes, and limited structural tunability of MFT hydrogels—while maintaining biocompatibility remains challenging. In this study, sodium alginate and gelatin are used to formulate an alginate–gelatin–fibrinogen hydrogel that avoids the operational complexity associated with the initial cross-linking of thrombin and the instability of Matrigel. Notably, the alginate–gelatin–fibrinogen hydrogel showed significant shear-thinning behavior and exhibited good printability for different structures. This approach overcomes the critical limitations of extrusion printing using MFT hydrogels to fabricate muscle tissue structures with different requirements. We also used a novel quality assessment method proposed in our previous study, which incorporates the relative mean width (Rel.[X with combining macron]) and relative standard deviation (Rel.SD) of extruded filaments to quantitatively evaluate printing quality. This approach enables the realization of an ideal printing boundary. In addition, a comparison with the Young's modulus of MFT hydrogels revealed that alginate–gelatin–fibrinogen hydrogels crosslinked with calcium chloride possessed significantly improved mechanical properties. The dual-crosslinking mechanism achieved via enzymatic and/or ionic methods resulted in flexible tunability of the modulus and porosity of the material. Experimental findings using C2C12 myoblast cells grown on the alginate–gelatin–fibrinogen hydrogel surface demonstrate that this biomaterial facilitates 3D bioprinting of anatomically complex muscle tissue constructs and biohybrid robotic systems. Overall, this study provides a novel strategy for the application in muscle tissue construction, repair, and bio-robotics through designing alginate–gelatin–fibrinogen composite hydrogels.

Graphical abstract: Fabrication and characterization of a multifunctional alginate–gelatin–fibrinogen hydrogel for potential muscle tissue reconfiguration in vitro

Supplementary files

Article information

Article type
Paper
Submitted
19 Apr 2025
Accepted
18 Jun 2025
First published
23 Jul 2025
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. B, 2025, Advance Article

Fabrication and characterization of a multifunctional alginate–gelatin–fibrinogen hydrogel for potential muscle tissue reconfiguration in vitro

Z. Lin, Y. Hong, T. Jiang, Y. Yang, Y. Gao, H. Xie and Z. Luo, J. Mater. Chem. B, 2025, Advance Article , DOI: 10.1039/D5TB00912J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements