Charging-free thermally regenerative electrochemical cycles with high temperature coefficient for heat-to-electricity conversion

Abstract

Low-temperature heat is massive and considered as a potential renewable energy. Thermally regenerative electrochemical cycle (TREC) is one of the low-temperature thermos-electrochemical systems with the highest thermoelectric conversion efficiency. The charging-free TREC is more convenient for practical applications, but the power density and efficiency are lower than the traditional electrically-assisted TREC. Here, a series of charging-free TRECs based on composite Prussian blue analogues CuNiCoHCF and Fe(ClO4)2/3 are developed. By adjusting the metal ratio in CuNiCoHCF, electrolyte concentration and intercalation ions, the systems can match different ranges of heat source with high temperature coefficients of -2.2~-2.52 mV/K. In addition, a low-polarization operation strategy suitable for charging-free TREC is proposed, and the power density, energy density and absolute efficiency can be increased by 19.3-57.7%, 17-43.6% and 6.6-12%, respectively. The thermoelectric conversion efficiency of Cu3Ni1HCF/Na+//Fe(ClO4)2/3 system reached 2.42% and 4.29% between 20oC and 60oC when heat recuperation efficiencies are 0 and 50%.

Supplementary files

Transparent peer review

To support increased transparency, we offer authors the option to publish the peer review history alongside their article.

View this article’s peer review history

Article information

Article type
Paper
Submitted
28 Apr 2025
Accepted
02 Aug 2025
First published
04 Aug 2025

J. Mater. Chem. A, 2025, Accepted Manuscript

Charging-free thermally regenerative electrochemical cycles with high temperature coefficient for heat-to-electricity conversion

W. Wang, L. Tang, Z. Yan, Z. Li, D. Huo, H. Tian and G. Shu, J. Mater. Chem. A, 2025, Accepted Manuscript , DOI: 10.1039/D5TA03351A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements