Issue 9, 2025

Continuous low-pressure hydrothermal processing methods for polystyrene conversion to oils

Abstract

Polystyrene (PS) waste is generated at an annual rate of 28 million tons, yet less than 1% is recycled. PS in landfills and ecosystems degrades into microplastics and releases harmful chemicals. This study introduces a continuous low-pressure hydrothermal processing (LP-HTP) method for converting PS into valuable oils without a catalyst. Two continuous reactors were designed, built, and tested at average temperatures from 394 to 538 °C, PS feed rates up to 1.2 kg h−1, and residence times from 0.7 to 3.4 minutes. The process achieved 99 wt% oil yields with minimal gas formation. Water in LP-HTP suppressed char formation to <1 wt%. Lower temperatures and shorter residence times favored styrene production. At 397 °C and 2.0 minutes, the oil contained 65 wt% styrene monomer, and 88 wt% combined styrene monomer, dimer, and trimer. Reaction pathways were proposed based on hydrocarbon species identified via GC-MS/FID analyses. A detailed kinetic model was developed using oil composition data from 28 oil samples across three experiments. The model-predicted oil compositions agreed within 6% standard error of the values measured in an independent fourth experiment. The model was used to determine optimal conditions for maximizing styrene product yields. This atmospheric-pressure continuous LP-HTP process is simpler and more cost-effective than batch LP-HTP (2–3 MPa) or supercritical water liquefaction (>22 MPa). It offers a scalable and efficient route to recover valuable monomers from PS waste. It has the potential to reduce PS waste consigned to landfills and mitigate its impact on human health and the environment.

Graphical abstract: Continuous low-pressure hydrothermal processing methods for polystyrene conversion to oils

Supplementary files

Transparent peer review

To support increased transparency, we offer authors the option to publish the peer review history alongside their article.

View this article’s peer review history

Article information

Article type
Paper
Submitted
13 Dec 2024
Accepted
29 Jun 2025
First published
30 Jun 2025
This article is Open Access
Creative Commons BY-NC license

RSC Sustainability, 2025,3, 3925-3946

Continuous low-pressure hydrothermal processing methods for polystyrene conversion to oils

C. Gentilcore, C. Un, J. Martinez-Maldonado, P. Vozka and N. L. Wang, RSC Sustainability, 2025, 3, 3925 DOI: 10.1039/D4SU00796D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements