Issue 47, 2025, Issue in Progress

Solvent-free synthesis of amine-grafted adsorbent for direct air capture

Abstract

Amino-silane-grafted adsorbents were successfully synthesized by a solvent-free method. A silane solution was introduced into the pores of a porous silica support through capillary action and grafted by subsequent heating. Characterization of materials with different synthesis and pre-treatment conditions revealed that the pre-treatment to remove the water in the support and suitable amounts of silane were crucial factors to uniformly graft the amine on the porous support in the solvent-free method. Further, we investigated the CO2 adsorption performance of amine-grafted materials in dry or humid 400 ppm CO2 gases, demonstrating that the obtained materials synthesized by the solvent-free method exhibited good adsorption performance, comparable to that of conventional CO2 adsorbents.

Graphical abstract: Solvent-free synthesis of amine-grafted adsorbent for direct air capture

Supplementary files

Article information

Article type
Paper
Submitted
13 May 2025
Accepted
15 Oct 2025
First published
20 Oct 2025
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2025,15, 39672-39676

Solvent-free synthesis of amine-grafted adsorbent for direct air capture

J. Li, N. Tsunoji and M. Sadakane, RSC Adv., 2025, 15, 39672 DOI: 10.1039/D5RA03355A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements