Issue 31, 2025

Dual surface functionalised curcumin-shellac nano-delivery system with enhanced antimicrobial action

Abstract

We report a strong boost of the antimicrobial action of curcumin (CUR) upon encapsulation in sterically stabilized shellac-based nanoparticles (NPs) with cationic surface functionalisation. The CUR-loaded shellac NPs were fabricated by solvent attrition and co-precipitation by mixing an aqueous solution of ammonium shellac and an ethanolic solution of curcumin followed by a pH drop from 8 to 5 in the presence of the sterically stabilising polymer Poloxamer 407 (P407). The surface functionalisation of the produced curcumin nanocarrier was done by subsequent doping with the water-insoluble cationic surfactant octadecylthrimethylammonium bromide (ODTAB). Optimal nanocarrier stability was obtained at a fixed ratio of (0.25 : 0.2) wt% of shellac : poloxamer 407 concentrations. Shellac NP formulations containing 0.01–0.07 wt% concentration range of encapsulated CUR with 0.25 wt% shellac at pH 5 were successfully produced and examined for the efficiency of CUR encapsulation and its release from these nanocarriers. We studied the antibacterial action of CUR-NPs before and after the cationic surface functionalisation to evaluate the encapsulation efficiency, the role of the nanocarrier components and surface properties on its antibacterial, antiyeast and antialgal action. The antimicrobial effect of the surface functionalised CUR loaded-shellac NPs was evaluated on different proxy microorganisms, including E. coli, C. reinhardtii and S. cerevisiae. The cationic coating of the shellac NPs strongly enhanced the antimicrobial effect of the encapsulated CUR for all the examined microorganisms. We envisage that the enhanced effect is due to the strong electrostatic attraction of the coated CUR-loaded shellac NPs and the anionic surface of the cell walls which promote the nanocarrier accumulation directly on the microbial cell membrane and the local delivery of CUR which increased its bioavailability. This nanotechnology-aided amplification of the antimicrobial effect of CUR may potentially offer new antialgal, anti-yeast and antibacterial formulations based on natural ingredients as shellac and curcumin without the use of conventional antibiotics.

Graphical abstract: Dual surface functionalised curcumin-shellac nano-delivery system with enhanced antimicrobial action

Supplementary files

Article information

Article type
Paper
Submitted
07 May 2025
Accepted
20 Jun 2025
First published
18 Jul 2025
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2025,15, 25497-25509

Dual surface functionalised curcumin-shellac nano-delivery system with enhanced antimicrobial action

S. S. M. Al-Obaidy, G. M. Greenway, S. Kalmagambetova and V. N. Paunov, RSC Adv., 2025, 15, 25497 DOI: 10.1039/D5RA03212A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements