Anomalous Raman signal in multilayer hexagonal boron nitride grown by chemical vapour deposition on metal foil catalyst

Abstract

Hexagonal boron nitride (hBN), a two-dimensional (2D) wide bandgap material, serves as an ideal insulating substrate and a protection layer for other 2D materials, such as graphene and transition metal dichalcogenides (TMDs). Here, we report for the first time the emergence of an anomalous Raman peak observed in single-crystal, multilayer pyramidal hBN grains grown on Fe-Ni alloy foil by chemical vapour deposition (CVD). This peak locates near the characteristic E2g band (1367 cm-1) and shifts to higher wavenumbers with increasing the number of hBN layers, peaking at ~1415 cm-1 at the centre of hBN grains. The appearance of this Raman peak is attributed a blue shift of the E2g phonon caused by compressive strain induced during the cooling step in the CVD process. Triangular hBN grains are epitaxially grown on the alloy catalyst and hence are strongly affected by the volume change of the Fe-Ni alloy catalyst and by lateral compression induced by the steps of the Fe-Ni surface. The maximum strain calculated from the peak shift is −1.23 %, which is much higher than the values previously reported for strained hBN, indicating a strong impact of the metal catalyst on the growing hBN structure. These results demonstrate the feasibility of the strain engineering in hBN via CVD growth.

Supplementary files

Article information

Article type
Paper
Submitted
26 Mar 2025
Accepted
13 Aug 2025
First published
18 Aug 2025
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2025, Accepted Manuscript

Anomalous Raman signal in multilayer hexagonal boron nitride grown by chemical vapour deposition on metal foil catalyst

T. Okonai, P. Solís-Fernández, S. Fukamachi, H. Sun, Y. Lee, Y. Lin, T. Kato, S. Ryu, K. Suenaga and H. Ago, Nanoscale Adv., 2025, Accepted Manuscript , DOI: 10.1039/D5NA00283D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements