Issue 21, 2025

Non-piezoelectric SiO2 amorphous nanomaterials for highly tribocatalytic water purification

Abstract

Being widely available in the earth's rock layers, SiO2 is among the earth's most thoroughly distributed natural mineral resources. Here, non-piezoelectric amorphous SiO2 mineral nanoparticles have been experimentally designed for efficient tribocatalytic dye degradation under mechanical friction provided by 400–1200 rpm low-velocity stirring. The friction between the catalyst surface and the stirring rod leads to the generation of positive and negative charges, which react with hydroxide and oxygen, respectively, in the dye solution to produce some active substances, resulting in tribocatalytic organic dye degradation. After being mechanically stirred at 1000 rpm for 6 h using amorphous SiO2 mineral nanoparticle catalysts, ∼95.2% of Rhodamine B dye can be obviously degraded. Radical trapping experiments show that ˙OH and ˙O2 are the main active substances. Furthermore, increasing the contact area or the friction contact interface's roughness is helpful for enhancing the tribocatalytic performance. After 3 recycling cycles, the SiO2 nanoparticles can still degrade ∼89.2% of RhB dye. These low-cost SiO2 mineral nanoparticles, with the advantage of being widely distributed, have the potential to harvest common environmental mechanical friction energy for the purpose of organic pollutant degradation.

Graphical abstract: Non-piezoelectric SiO2 amorphous nanomaterials for highly tribocatalytic water purification

Article information

Article type
Paper
Submitted
26 Mar 2025
Accepted
22 Apr 2025
First published
23 Apr 2025

Dalton Trans., 2025,54, 8527-8535

Non-piezoelectric SiO2 amorphous nanomaterials for highly tribocatalytic water purification

Y. Zhang, J. Che, Y. Gao, C. Pei and Y. Jia, Dalton Trans., 2025, 54, 8527 DOI: 10.1039/D5DT00732A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements