Issue 27, 2025

Selective benzaldehyde/acetone to benzalacetone cross-aldol condensation catalyzed by UiO-66 MOFs

Abstract

Cross-aldol condensation reactions are an important family of reactions that generate added-value chemicals with long chain products. Those products have multiple applications, such as those in the pharmaceutical industry, flavors and fragrances, agricultural chemicals and fine and specialty chemicals, among others. Possible products are long chain aromatic compounds, which could be used to generate fuels. The ability to generate that kind of fuel from biomass has been a challenge over the last few years. In this report the cross-aldol condensation reaction study using a family of UiO-66 MOFs between benzaldehyde and acetone to produce benzalacetone was performed. Thus, a family of UiO-66 MOFs was synthesized and characterized (by means of N2 physisorption, NH3-TPD, CO2-TPD, ATR-FTIR, and powder X-ray diffraction) and its catalytic activity was studied in detail. Good conversion and selectivity were obtained. A thorough study of the kinetics of this reaction was performed for all the used UiO-66 MOFs. In this sense, the Langmuir–Hinshelwood kinetic models fitted the experimental data. The behavior predictions using different metals (Zr, Hf or Zr/Hf) and linkers (BDC or PDC) were fitted from the bimolecular one-site and two-site models. Competitive and non-competitive mechanisms were used to explain the production of the main intermediate compound (β-hydroxy ketone). The catalyst Zr/Hf-UiO-66 showed the best activity, which could be attributed to the greater total interaction energy of benzaldehyde/acetone on the catalyst surface (as shown by DFT calculations). A synergetic effect is observed for the bimetallic UiO-66 catalyst between Zr and Hf, obtaining a higher reaction rate than for the monometallic catalysts. Furthermore, a similar effect was reflected in the TOF for Zr/Hf-UiO-66. The best selectivity towards benzalacetone was obtained for Hf-UiO-66-PDC under iso-conversion conditions. Finally, depending on the metal–linker pair, differences in the benzaldehyde/acetone adsorption modes were observed, indicating the presence of bimolecular kinetic adjustments at one and two sites for the aldol condensation of benzaldehyde. All the results shown herein were supported by means of DFT calculations.

Graphical abstract: Selective benzaldehyde/acetone to benzalacetone cross-aldol condensation catalyzed by UiO-66 MOFs

Supplementary files

Article information

Article type
Paper
Submitted
27 Feb 2025
Accepted
26 May 2025
First published
05 Jun 2025
This article is Open Access
Creative Commons BY-NC license

Dalton Trans., 2025,54, 10599-10613

Selective benzaldehyde/acetone to benzalacetone cross-aldol condensation catalyzed by UiO-66 MOFs

C. Pazo-Carballo, E. Camú, Y. Hidalgo-Rosa, J. Llanos, X. Zarate, A. B. Dongil, E. Schott and N. Escalona, Dalton Trans., 2025, 54, 10599 DOI: 10.1039/D5DT00494B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements