Issue 14, 2025

Utilising highly conductive TPU “sticks” for facile and low-cost electroanalysis

Abstract

Rapid, on-site analysis of environmental contaminants necessitates the use of cost-effective and straightforward apparatus to encourage widespread adoption and align with the United Nations Sustainable Development Goal 6: Clean Water and Sanitation. In this work, we report the development of highly conductive thermoplastic polyurethane (TPU) filaments that can be easily cut and assembled into “sticks”, functioning as standalone rod-like working electrodes for electrochemical and electroanalytical applications. Using TPU as the base polymer, filaments filled with 35, 40, and 45 wt% carbon black (CB) were fabricated and characterised both physicochemically and electrochemically at different lengths (2.5, 5 and 10 mm). Among these, the 45 wt% CB filaments demonstrated the best electrode performance. Interestingly, due to morphological differences between the cross-section and the outer surface of the filament, extending the length of the filament sticks to 10 mm resulted in significant splitting of electrochemical peaks. Consequently, 5 mm sticks were optimised and employed for the electroanalytical detection of acetaminophen, achieving a linear detection range of 5–800 μM, a detection limit of 1.74 μM, and a quantification limit of 5.70 μM. These sticks were further validated by successfully detecting acetaminophen in tap and river water samples. This work introduces an innovative approach to reducing costs and simplifying on-site electrochemical analysis by using predefined lengths of conductive plastic filaments, which can be conveniently transported and stored on a spool until needed. The simplicity and affordability of this method enhance the commercial viability of electroanalytical sensing technologies.

Graphical abstract: Utilising highly conductive TPU “sticks” for facile and low-cost electroanalysis

Supplementary files

Article information

Article type
Paper
Submitted
28 Apr 2025
Accepted
05 Jun 2025
First published
11 Jun 2025
This article is Open Access
Creative Commons BY license

Analyst, 2025,150, 3147-3157

Utilising highly conductive TPU “sticks” for facile and low-cost electroanalysis

A. C. M. Oliveira, E. Bernalte, R. D. Crapnell, R. A. A. Muñoz and C. E. Banks, Analyst, 2025, 150, 3147 DOI: 10.1039/D5AN00472A

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements