Issue 29, 2024

Transient polymer electronics enabled by grafting of oligo-3-hexylthiophenes onto polycaprolactone

Abstract

One of the desirable properties of organic electronics materials, especially for their use in wearable and medical electronics, is transience, where the material undergoes controlled degradation into harmless byproducts after a predefined period of use. Conducting polymer-based materials have emerged as highly promising candidates for transient electronics, owing to their inherent versatility in chemical modification and synthesis. Here, we present an approach to achieve transience in polymer electronic materials featuring varying lengths of conductive oligo 3-hexylthiophene (O3HT) grafted, at different densities, onto a degradable polycaprolactone (PCL) backbone. The copolymers can be fabricated into flexible thin films that, upon doping, exhibit semiconducting properties with conductivities of up to 5.6 mS cm−1. Notably, these copolymers demonstrate susceptibility to degradation in both acidic and alkaline environments and a limited degradation in an enzymatic solution. Moreover, their potential for integration into flexible electrochemical devices is promising, as demonstrated by their use in an organic electrochemical transistor (OECT) device.

Graphical abstract: Transient polymer electronics enabled by grafting of oligo-3-hexylthiophenes onto polycaprolactone

Supplementary files

Article information

Article type
Paper
Submitted
15 Dec 2023
Accepted
18 Jun 2024
First published
24 Jun 2024

J. Mater. Chem. C, 2024,12, 11157-11173

Transient polymer electronics enabled by grafting of oligo-3-hexylthiophenes onto polycaprolactone

E. W. C. Chan, X. Sun, Y. Uda, B. Zhu, D. Barker and J. Travas-Sejdic, J. Mater. Chem. C, 2024, 12, 11157 DOI: 10.1039/D3TC04621D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements