Issue 28, 2024

Strain and defect-engineering on the basal plane of ultra-large MoS2 monolayers attached onto stretchable gold electrodes

Abstract

Strain and defect-engineering methods have been widely used to tune a variety of properties of monolayer MoS2 towards optical, electronic, mechanical, and electrochemical applications. For electrochemical applications in the field of energy, i.e. hydrogen evolution reaction (HER), defects act as catalytic sites to promote this reaction. Thus, the creation of routes that convert the relatively inert MoS2 basal plane into an HER-active system plays an essential role in this field. In this work, we report an innovative method that can generate both strain and edge-like defects on ultra-large MoS2 monolayers anchored onto stretchable gold electrodes. By simply stretching the electrodes, tensile strain, and oriented crack formation were achieved on the basal plane. Raman, photoluminescence, and atomic force microscopy experiments confirmed the presence of strain. Simulation of the stretching process reveals the regions that are more prone to crack, which was experimentally confirmed by scanning electron microscopy and laser scanning confocal microscopy measurements. Density functional theory studies confirm that curvature effects alone do not improve significantly the HER activity, thus emphasizing the need to produce cracks in the MoS2 monolayers to improve the catalytic activity. Finally, the stretch-induced cracks can reduce the overpotential measured at 10 mA cm−2 to 352 mV. The electrocatalytic activity is superior when compared to pristine MoS2 and presents remarkable stability up to 500 cycles.

Graphical abstract: Strain and defect-engineering on the basal plane of ultra-large MoS2 monolayers attached onto stretchable gold electrodes

Supplementary files

Article information

Article type
Paper
Submitted
27 Mar 2024
Accepted
14 Jun 2024
First published
16 Jun 2024

J. Mater. Chem. A, 2024,12, 17338-17349

Strain and defect-engineering on the basal plane of ultra-large MoS2 monolayers attached onto stretchable gold electrodes

L. H. Hasimoto, A. B. S. de Araujo, C. de Lourenço, L. Merces, G. Candioto, E. R. Leite, R. B. Capaz and M. Santhiago, J. Mater. Chem. A, 2024, 12, 17338 DOI: 10.1039/D4TA02042A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements