Morphology of impact polypropylene copolymer extruded cast film revealed by confocal Raman imaging

Abstract

An impact polypropylene copolymer (IPC), composed of polypropylene (PP) and ethylene-propylene copolymer (EPC), was synthesized through two-stage in-reactor polymerization. A systematic investigation of the crystalline structure, thermal behavior, morphology, and tensile properties of the IPC extruded cast film was conducted. Specifically, the morphology of EPC was obtained by confocal Raman imaging by depicting the spatial distribution of the Raman band located at 1064 cm⁻¹. The EPC phase exhibits fibrous morphology with the long axis aligning along the machine direction (MD). A three-dimensional (3D) heterogeneous structure of the IPC cast film obtained by confocal Raman imaging confirms that the fibrous EPC phase is dispersed in a 3D framework of the PP matrix. The mesomorphic phase in the as-prepared cast film transforms to a stable α-form crystal after annealing at 130 °C, which improves the yield strength but decreases the elongation of the cast film. The WAXD and SAXS results indicate that there is no obvious orientation of the crystallites. Thus, the anisotropy of tensile properties in the MD and transverse directions is closely related to the anisotropic phase morphology at the micrometer scale. The results reveal that the mechanical performances of IPC films are determined by the crystalline structure of the PP matrix and the morphology.