Different-grain-sized boehmite nanoparticles for stable all-solid-state lithium metal batteries

Abstract

PEO is one of the common composite polymer electrolyte vehicles; however, the presence of crystalline phase at room temperature, high interface impedance, and low oxidation resistance (<4.0 V) limit its application in stable all-solid-state lithium metal batteries. Herein, we designed a PEO-based solid polymer electrolyte (SPE) by adding boehmite nanoparticles to address the above-mentioned issues. Different-grain-sized boehmite nanoparticles were synthesized by adjusting the hydrothermal temperature. Moreover, the impacts of these distinct grain-sized boehmite nanoparticles used to fabricate boehmite/PEO polymer electrolytes (BPEs) on the performance of all-solid-state lithium metal batteries were investigated. It was found that with the increase in boehmite's grain size, BPEs show better performance. The best BPE exhibited an improved Li⁺ transference number (0.59), high ionic conductivity (1.25 × 10⁻⁴ S m⁻¹), and wide electrochemical window (∼4.5 V) at 60 °C. The assembled lithium symmetric battery can stably undergo 500 hours of lithium plating/stripping at 0.1 mA cm⁻². At the same time, the LiFePO₄/BPE/Li battery exhibits excellent cycling stability after 100 cycles at 0.5C. This reasonable design strategy with a superior capacity retention rate (86%) demonstrates great potential in achieving high ionic conductivity and good interface stability for all-solid-state lithium metal batteries simultaneously.