Issue 44, 2024

Electron beam-assisted synthesis of porous Cu2MoS4 nanocubes for efficient all-pH electrocatalytic hydrogen evolution

Abstract

Transition metal sulfides are promising non-noble metal catalysts for hydrogen production through electrochemical water splitting due to their rich redox behaviors, good conductivity and stability. Herein, mesoporous Cu2MoS4 nanocubes were rapidly synthesized at room temperature via a novel electron beam irradiation-assisted method. During the electron beam irradiation process, a large number of free radicals were produced. These radicals are highly active and effectively accelerate the rapid formation of Cu2MoS4 nanocubes with I-phase. The as-obtained Cu2MoS4 nanocubes presented a mesoporous structure, which not only provides abundant electrocatalytic active sites but also facilitates the diffusion of electrolyte and the overflow of H2 bubbles. As a result, the titled catalyst exhibits good electrocatalytic activity toward the hydrogen evolution reaction (HER) in acidic, neutral and alkaline electrolytes. Specifically, the catalyst with an irradiation dose of 300 kGy exhibited the best HER performance with low overpotentials of 160.2 mV, 256.2 mV and 225 mV to achieve a current density of 10 mA cm−2 in 0.5 M H2SO4, 1 M PBS and 1 M KOH, respectively. This work demonstrates the effectiveness of electron beam-assisted synthesis in producing well-defined nanostructured catalysts for water splitting.

Graphical abstract: Electron beam-assisted synthesis of porous Cu2MoS4 nanocubes for efficient all-pH electrocatalytic hydrogen evolution

Supplementary files

Article information

Article type
Paper
Submitted
25 Jul 2024
Accepted
14 Oct 2024
First published
30 Oct 2024

New J. Chem., 2024,48, 18883-18889

Electron beam-assisted synthesis of porous Cu2MoS4 nanocubes for efficient all-pH electrocatalytic hydrogen evolution

Z. Wang, S. Huang, H. Wang and M. Wu, New J. Chem., 2024, 48, 18883 DOI: 10.1039/D4NJ03322A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements