Issue 15, 2024

Electrochemical catalysis for the production of green cement: towards decarbonizing the cement industry

Abstract

Among the most significant sources of CO2 emissions, cement manufacturing contributes 8% of such emissions worldwide. The CO2 emissions are generated from a few key sources: around 60% comes from the decomposition of limestone into calcium oxide, 30% from the combustion of fossil fuels (mainly coal), and roughly 10% from power consumption. To reduce CO2 emissions during cement manufacturing, alternative fuels, binders, and renewable energy sources could be utilized to achieve carbon neutrality. However, the reduction of CO2 released from the conversion process of limestone into calcium oxide still presents a significant challenge. This review provides a comprehensive analysis of different electrochemical production approaches of green cement. One of these promising approaches is the decarbonization of CaCO3 into Ca(OH)2, while generating pure H2 at the cathode and O2/CO2 gas mixtures at the anode, using several pathways. Ca(OH)2 is a precursor to cement clinker, whose primary use is to manufacture Portland cement. The produced concentrated gas streams of H2 and/or O2 can be used to produce electricity with extremely little pollution through fuel cells or combustion engines. Although hydrogen is the basic fuel for fuel cells, fuel cells require oxygen too. Large portions of hydrogen and oxygen combine to form a harmless by-product, which is water. From an economic point of view, this produced electrical current can be directed to the green cement manufacturing process and can be used to power any electric motor or device.

Graphical abstract: Electrochemical catalysis for the production of green cement: towards decarbonizing the cement industry

Article information

Article type
Review Article
Submitted
03 Jan 2024
Accepted
19 Jun 2024
First published
20 Jun 2024

Catal. Sci. Technol., 2024,14, 4087-4105

Electrochemical catalysis for the production of green cement: towards decarbonizing the cement industry

N. Bahnasawy, S. Al Anany and N. K. Allam, Catal. Sci. Technol., 2024, 14, 4087 DOI: 10.1039/D4CY00009A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements