Preparation and application of a Cu-doped antimony electrode to improve the performance of pH measurement in seawater

Abstract

Antimony-based electrodes are widely used in various fields for pH detection due to their low cost. However, their application in the marine environment is significantly hampered by the significant potential drift observed in seawater pH measurements. This study focuses on enhancing the stability of a pure antimony electrode by doping various amounts of copper without compromising its pH response. A series of electrochemical tests demonstrated that the fabricated alloy electrodes exhibited excellent pH response characteristics, including sensitivity, ion selectivity, response time, reversibility, and temperature coefficients. Moreover, the alloy electrodes were more resistant to corrosion than the pure antimony electrode, thereby guaranteeing the stability. Notably, the alloy electrodes containing 63 at% and 70 at% antimony exhibited superior electrochemical characteristics. The surface analysis elucidated that the alloy electrode had reduced oxidation, surface cracks and antimony peeling compared to the pure antimony electrode. Furthermore, the prepared alloy electrodes exhibited excellent pH response and stability in simulated high-salinity seawater and real seawater. The above results highlight that doping cheap copper into antimony can improve the electrode stability by enhancing the corrosion resistance and slowing down the oxidation rate, thus enabling reliable long-time operation in a relatively stable state. These findings provide experimental support for developing novel pH electrodes based on non-noble metals for use in challenging environments such as seawater.