Issue 17, 2023

Enabling enhanced lithium storage capacity of two-dimensional pentagonal BN2 by aluminum doping

Abstract

Researchers studying Li-ion batteries (LIBs) have become very interested in two-dimensional (2D) materials possessing an unusual pentagonal atomic structure. Recently, penta-graphene, penta-B2C, and penta-BN2 have been theoretically described. These materials are attractive for use as state-of-the-art anodes in LIBs due to their high storage capacities of 1489, 1594, and 2071 mA h g−1, respectively. Here, we propose enhancing storage capacity by introducing defect doping. For example, one Al atom was incorporated into 2 × 2 penta-BN2, corresponding to AlB7N16. The energy calculated for the adsorption of a single Li atom onto the Al-doped material is more favorable than that for the Al-free analog, indicating that doping can strengthen an affinity for Li. The Al-doped penta-BN2 exhibits metallic conductivity during Li adsorption. In the layer-by-layer Li adsorption, doping a single Al atom into 2 × 2 penta-BN2 has an 11% higher storage capacity (2297 mA h g−1) than penta-BN2 despite having a slightly heavier formula weight. The Al-doped penta-BN2 displays a low open-circuit voltage of 0.48 V. Substituting aluminum for boron enhances the Li adsorption capacity of penta-BN2, and the computed storage capacity is presently one of the highest published values for pentagonal materials.

Graphical abstract: Enabling enhanced lithium storage capacity of two-dimensional pentagonal BN2 by aluminum doping

Supplementary files

Article information

Article type
Paper
Submitted
20 Jan 2023
Accepted
16 Apr 2023
First published
21 Apr 2023

J. Mater. Chem. C, 2023,11, 5825-5830

Enabling enhanced lithium storage capacity of two-dimensional pentagonal BN2 by aluminum doping

T. Thanasarnsurapong, P. Detrattanawichai, K. Dabsamut, K. Simalaotao, T. Maluangnont and A. Boonchun, J. Mater. Chem. C, 2023, 11, 5825 DOI: 10.1039/D3TC00247K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements