Issue 24, 2023

Deep red emission from rare-earth-free calcium aluminozincate phosphor with the substitution of Cr3+ ion

Abstract

Chromium-doped calcium aluminozincate phosphor with a distinct amount of chromium was prepared via the sol–gel technique. The phase analysis and morphological study along with optical properties were conducted on the prepared material. The room temperature luminescent traits of the sample were studied in detail under 540 nm excitation wavelength. The deep red emission was confirmed from the CIE coordinates calculated using emission data. The decay curves were recorded to calculate the lifetime values for the aforementioned powder samples. The temperature-dependent luminescent characteristics were also investigated to identify the activation energy and thermal stability. The quantum yield was also calculated using luminescence spectra and found to be relatively good for the present phosphor. All of the investigated studies specified above signify that the synthesized phosphor is well suited as a red emitter in lighting and display devices.

Graphical abstract: Deep red emission from rare-earth-free calcium aluminozincate phosphor with the substitution of Cr3+ ion

Article information

Article type
Paper
Submitted
31 Mar 2023
Accepted
14 May 2023
First published
02 Jun 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 16663-16670

Deep red emission from rare-earth-free calcium aluminozincate phosphor with the substitution of Cr3+ ion

S. Kaur, V. Kumar and A. S. Rao, RSC Adv., 2023, 13, 16663 DOI: 10.1039/D3RA02129G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements