Issue 3, 2023

Well-dispersed Ni3Fe nanoparticles with a N-doped porous carbon shell for highly efficient rechargeable Zn–air batteries

Abstract

NiFe-based nanoparticles attached to heteroatom-doped carbon are found to act as tremendously efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts. Nevertheless, it is extremely challenging to control the particle size and avoid aggregation. Herein, nitrogen-doped carbon encapsulated Ni3Fe nanoparticles (Ni3Fe@NC) are prepared by two-stage pyrolysis with a low rate based on the in situ structural evolution of FeNi-PBAs. The strategy results in uniform Ni3Fe nanoparticles anchoring within the carbon shell and thus facilitating interfacial interaction. Benefiting from the enhanced synergism between Ni3Fe particles and NC layers, Ni3Fe@NC-600 demonstrates the best catalytic activity and durability, not only with almost the same onset potential (1.01 V) as commercial Pt/C for the ORR but also satisfactory OER performance with a low overpotential of 0.29 V at 10 mA cm−2 in 0.1 M KOH. Moreover, the Zn–air battery assembled using the Ni3Fe@NC-600 cathode exhibits superior performance to commercial Pt/C + RuO2. The simple and scalable method of this work provides insight into the fabrication of high-performance and cost-effective bifunctional oxygen electrocatalysts.

Graphical abstract: Well-dispersed Ni3Fe nanoparticles with a N-doped porous carbon shell for highly efficient rechargeable Zn–air batteries

Supplementary files

Article information

Article type
Paper
Submitted
20 Oct 2022
Accepted
14 Nov 2022
First published
15 Nov 2022

Nanoscale, 2023,15, 1172-1179

Well-dispersed Ni3Fe nanoparticles with a N-doped porous carbon shell for highly efficient rechargeable Zn–air batteries

Y. Liu, J. Ma, T. K. A. Hoang, L. Yang and Z. Chen, Nanoscale, 2023, 15, 1172 DOI: 10.1039/D2NR05827H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements