Issue 11, 2023

MIL-88A derived CoFe-layered double hydroxides with optimized composition for the enhanced electrocatalytic oxygen evolution reaction

Abstract

The oxygen evolution reaction (OER) as the anodic half-reaction of water electrolysis has received growing attention due to its paramount role in the green and sustainable production of hydrogen fuel and metal–air batteries. Herein, we report the synthesis of five CoFe-layered double hydroxides (CoFe-LDHs) and their application toward the electrocatalytic OER in an alkaline medium. CoFe-LDHs were prepared via a novel hydrothermal route from the MIL-88A metal–organic framework (MOF). The Co-to-Fe ratios in the LDHs were systematically modified to tune the electrocatalytic activity in the OER. It was observed that the as-prepared Co0.39Fe0.61-LDH demonstrated a superior electrocatalytic performance compared to the rest of the materials. More precisely, Co0.39Fe0.61-LDH required an overpotential of 227 mV to derive 20 mA cm−2 current density with a Tafel slope of 36.8 mV dec−1 and exhibited remarkable electrochemical stability. Besides, this LDH delivered an industrial-scale current density of 600 mA cm−2 at an overpotential of 284 mV. Our results imply that modulating the metal content of LDHs is a simple yet effective strategy to promote their electrocatalytic activity toward the OER.

Graphical abstract: MIL-88A derived CoFe-layered double hydroxides with optimized composition for the enhanced electrocatalytic oxygen evolution reaction

Supplementary files

Article information

Article type
Paper
Submitted
11 Dec 2022
Accepted
15 Feb 2023
First published
16 Feb 2023

New J. Chem., 2023,47, 5555-5563

MIL-88A derived CoFe-layered double hydroxides with optimized composition for the enhanced electrocatalytic oxygen evolution reaction

D. Taherinia, M. Hajilo and F. Mirzaee Valadi, New J. Chem., 2023, 47, 5555 DOI: 10.1039/D2NJ06061B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements