Issue 30, 2023

Structural and optical characterisation of silanised Dy-doped-Gd2O3 NPs

Abstract

In this work, we studied the optical properties of Dy-doped Gd2O3 nanoparticles (NPs) before and after their APTES functionalisation. We obtained luminescent Dy@Gd2O3 NPs (0.5, 1, and 5% mol) using a modified polyol method. Our work describes their detailed structural analysis using FT-IR, XRD, HRTEM, TGA and XAS techniques. The results show that these systems present a crystalline structure with a body-centred cubic cell and particle sizes of 10 nm. The dopant position was inferred as substitutional, through XAS analysis at the M4,5-edges of Gd and Dy and K-edge of O, and in C2 sites, based on photoluminescence studies. There was sensitization of the luminescence by the matrix as shown by the emission increase of the hypersensitive transition (6F9/26H13/2, 572 nm) and also a broadband appears around 510 nm attributed to defects in Gd2O3. An enhanced emissive lifetime of 398 μs was found for the sample doped at 1%. We functionalised the Dy@Gd2O3 (at 1%) NPs with 3-aminopropiltrietoxisilane (APTES) for further application as a biomarker sensor. We found that these NPs conserved their luminescence after adding the surface agent (avoiding quenching effects) making them potential materials for biosensing.

Graphical abstract: Structural and optical characterisation of silanised Dy-doped-Gd2O3 NPs

Supplementary files

Article information

Article type
Paper
Submitted
07 Feb 2023
Accepted
06 Apr 2023
First published
10 Apr 2023

Phys. Chem. Chem. Phys., 2023,25, 20308-20319

Structural and optical characterisation of silanised Dy-doped-Gd2O3 NPs

E. Armenta-Jaime, J. Molina-González, K. P. Salas-Martin, R. Fan, L. Chang, J. Chen, P. Steadman, H. Desirena-Enrriquez, A. Dutt, P. Olalde-Velasco and S. E. Castillo-Blum, Phys. Chem. Chem. Phys., 2023, 25, 20308 DOI: 10.1039/D3CP00618B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements