Issue 46, 2022

Comment on “Structural, electrical, and multiferroic characteristics of lead-free multiferroic: Bi(Co0.5Ti0.5)O3–BiFeO3 solid solution” by N. Kumar, A. Shukla, N. Kumar, R. Choudhary and A. Kumar, RSC Adv., 2018, 8, 36939”

Abstract

My comments concern the significant errors in the crystallographic part of the commented paper. It was found that the studied crystal is of the sillenite type and the correct formula should be Bi25FeO39 : Co,Ti instead of BiFeO3. Moreover, the type of unit cell is not correct. Due to the double doping the new type of unit cell, previously unknown, was proposed for such crystals. Furthermore, the authors did not find that the studied sample contains two slightly different phases, both of the sillenite type. The actual chemical composition of the studied crystals is not known.

Graphical abstract: Comment on “Structural, electrical, and multiferroic characteristics of lead-free multiferroic: Bi(Co0.5Ti0.5)O3–BiFeO3 solid solution” by N. Kumar, A. Shukla, N. Kumar, R. Choudhary and A. Kumar, RSC Adv., 2018, 8, 36939”

Associated articles

Article information

Article type
Comment
Submitted
16 Nov 2021
Accepted
07 Oct 2022
First published
20 Oct 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 30008-30010

Comment on “Structural, electrical, and multiferroic characteristics of lead-free multiferroic: Bi(Co0.5Ti0.5)O3–BiFeO3 solid solution” by N. Kumar, A. Shukla, N. Kumar, R. Choudhary and A. Kumar, RSC Adv., 2018, 8, 36939”

P. E. Tomaszewski, RSC Adv., 2022, 12, 30008 DOI: 10.1039/D1RA08415A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements