Issue 46, 2021

Defects in black zirconia responsible for solar energy harvesting

Abstract

Although metal oxides have been employed in the field of light-energy conversion, their wide band gaps limited the utilization of solar energy. Recently, several methods have been proposed to tune the band gap of metal oxides by implanting crystal defects and thus improving the light absorption performance. However, the enhancement mechanism of light absorption induced by crystal defects is lacking comprehensive atomic-scale insight. Herein, black zirconia (ZrO2), a type of defective metal oxide modified from ZrO2 with a wide band gap, was thoroughly investigated by combining first-principles calculations and experimental verification. The calculation results confirm that oxygen vacancies (VO) are the most likely defects generated in ZrO2 owing to their low formation energy in all chemical environments, which are widely accepted to elucidate the darkening phenomenon of defective ZrO2. Of note, we demonstrated for the first time that it is facile to generate interstitial zirconium (IZr) defects, which also can decrease the band gap and enhance the light absorption performance of ZrO2, under VO-rich conditions. Moreover, the IZr defects in ZrO2 can promote the absorption of long-wavelength visible light and near-infrared light, while the VO defects tend to facilitate the absorption of short-wavelength visible light. Therefore, the formation of VO and IZr defects provides an efficient approach to enhance the light absorption of ZrO2.

Graphical abstract: Defects in black zirconia responsible for solar energy harvesting

Supplementary files

Article information

Article type
Paper
Submitted
19 Aug 2021
Accepted
23 Oct 2021
First published
25 Oct 2021

J. Mater. Chem. C, 2021,9, 16732-16740

Defects in black zirconia responsible for solar energy harvesting

F. Qi, Z. Yang, Y. Wang, Q. Qiu and H. Li, J. Mater. Chem. C, 2021, 9, 16732 DOI: 10.1039/D1TC03914H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements