Issue 8, 2021

High-efficiency and thermal/moisture stable CsPbI2.84Br0.16 inorganic perovskite solar cells enabled by a multifunctional cesium trimethylacetate organic additive

Abstract

All-inorganic cesium lead iodine perovskite materials (CsPbI3) have been widely studied and applied to PSCs because of their excellent thermo-chemical stability and suitable bandgap. However, CsPbI3 still faces the issue of phase transitions under humid conditions. In this study, cesium trimethylacetate (CsTa) organic cesium salt is employed as an additive in the CsPbI2.84Br0.16 film. The results show that CsTa can have multifunctional effects on CsPbI2.84Br0.16 perovskite stability. The steric hindrance blocking effect of Ta anions can efficiently prevent the tilt of the [PbI6]4− octahedrons to inhibit the phase transition process from the corner-shared perovskite to the edge-shared non-perovskite structure. The Ta groups are firmly located at the X site of the perovskite structure, leading to an increase in the energy barrier for X-site vacancy generation (from 0.816 eV to 1.217 eV), which slows the phase transition process induced by lattice disorder. Meanwhile, the decrease in crystal grain size after adding CsTa is beneficial for perovskite phase stability due to the decreased surface Gibbs free energy of CsPbI2.84Br0.16 crystals. In addition, the reduced defect density brought about by the improved crystal quality is also favorable for increasing the energy barrier for the phase transition from the perovskite phase to the δ phase. Finally, a champion PCE of 16.59% can be achieved from the HPbI3-prepared PSCs with adding CsTa, which maintain 80.88% of the initial performance after more than 1200 hours in air (RH: ∼20%). Meanwhile, both 0.1-CsTa and 0.2-CsTa PbI2-prepared PSCs deliver excellent stability and maintain above 80% of the initial PCE after nearly 2000 hours. Impressively, under a relatively high thermal/moisture (temperature: 80 °C/RH: ∼80%) environment, the 0.2-CsTa devices can still retain 87.41% of the initial performance after 500 hours of storage.

Graphical abstract: High-efficiency and thermal/moisture stable CsPbI2.84Br0.16 inorganic perovskite solar cells enabled by a multifunctional cesium trimethylacetate organic additive

Supplementary files

Article information

Article type
Paper
Submitted
07 Dec 2020
Accepted
15 Jan 2021
First published
16 Jan 2021

J. Mater. Chem. A, 2021,9, 4922-4932

High-efficiency and thermal/moisture stable CsPbI2.84Br0.16 inorganic perovskite solar cells enabled by a multifunctional cesium trimethylacetate organic additive

H. Zhao, Y. Fu, Z. Li, S. Yang, B. Xu, X. Liu, J. Xu, S. (. Liu and J. Yao, J. Mater. Chem. A, 2021, 9, 4922 DOI: 10.1039/D0TA11858C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements