Issue 54, 2021

Enhanced photoresponse of a MoS2 monolayer using an AAO template

Abstract

Monolayer two-dimensional transition metal dichalcogenides (TMDs) with direct band gaps, such as MoS2, have received great attention from researchers due to their peculiar band structure and physical properties. However, their extremely small thickness (0.65 nm for MoS2) results in a critically low light absorption efficiency, thus limiting their optoelectronic applications. To achieve the enhancement of the light–matter interaction in MoS2, a resonant Al/AAO (anodic alumina oxide template)/MoS2 trilayer nanocavity structure was designed and implemented in the present study. In such a system, the appropriate change in pore size and pore depth of the AAO template via control of the growth conditions allows one to adjust the thickness and refractive index of the dielectric layer (AAO). This nanocavity structure provides a possible way to regulate the light–matter interaction of MoS2 film.

Graphical abstract: Enhanced photoresponse of a MoS2 monolayer using an AAO template

Article information

Article type
Paper
Submitted
05 Oct 2021
Accepted
07 Oct 2021
First published
25 Oct 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 34410-34415

Enhanced photoresponse of a MoS2 monolayer using an AAO template

C. Deng, K. Kang, Z. Yu, C. Zhou and S. Yang, RSC Adv., 2021, 11, 34410 DOI: 10.1039/D1RA07394J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements