Issue 44, 2021

Tuning the charge carrier mobility in few-layer PtSe2 films by Se : Pt ratio

Abstract

Recently, few-layer PtSe2 films have attracted significant attention due to their properties and promising applications in high-speed electronics, spintronics and optoelectronics. Until now, the transport properties of this material have not reached the theoretically predicted values, especially with regard to carrier mobility. In addition, it is not yet known which growth parameters (if any) can experimentally affect the carrier mobility value. This work presents the fabrication of horizontally aligned PtSe2 films using one-zone selenization of pre-deposited platinum layers. We have identified the Se : Pt ratio as a parameter controlling the charge carrier mobility in the thin films. The mobility increases more than twice as the ratio changes in a narrow interval around a value of 2. A simultaneous reduction of the carrier concentration suggests that ionized impurity scattering is responsible for the observed mobility behaviour. This significant finding may help to better understand the transport properties of few-layer PtSe2 films.

Graphical abstract: Tuning the charge carrier mobility in few-layer PtSe2 films by Se : Pt ratio

Associated articles

Article information

Article type
Paper
Submitted
10 Jun 2021
Accepted
03 Aug 2021
First published
10 Aug 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 27292-27297

Tuning the charge carrier mobility in few-layer PtSe2 films by Se : Pt ratio

J. Hrdá, V. Tašková, T. Vojteková, L. P. Slušná, E. Dobročka, I. Píš, F. Bondino, M. Hulman and M. Sojková, RSC Adv., 2021, 11, 27292 DOI: 10.1039/D1RA04507E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements