Issue 26, 2021

Modification of thermal transport in few-layer MoS2 by atomic-level defect engineering

Abstract

Molybdenum disulfide (MoS2) has attracted significant attention due to its good charge carrier mobility, high on/off ratio in field-effect transistors and novel layer-dependent band structure, with potential applications in modern electronic, photovoltaic and valleytronic devices. Despite these advantages, its thermal transport property has often been neglected until recently. In this work, we probe phonon transport in few-layer MoS2 flakes with various point defect concentrations enabled by helium ion (He+) irradiation. For the first time, we experimentally show that Mo-vacancies greatly impede phonon transport compared to S-vacancies, resulting in a larger reduction of thermal conductivity. Furthermore, Raman characterization shows that the in-plane Raman-sensitive peak E2g1 was red-shifted with increasing defect concentration, corresponding to the gradual damage of the in-plane crystalline networks and the gradual reduction in the measured thermal conductivity. Our work provides a practical approach for atomic-level engineering of phonon transport in two-dimensional (2D) layered materials by selectively removing elements, thus holding potential applications in designing thermal devices based on various emerging 2D materials.

Graphical abstract: Modification of thermal transport in few-layer MoS2 by atomic-level defect engineering

Supplementary files

Article information

Article type
Paper
Submitted
23 Mar 2021
Accepted
29 May 2021
First published
03 Jun 2021

Nanoscale, 2021,13, 11561-11567

Modification of thermal transport in few-layer MoS2 by atomic-level defect engineering

Y. Zhao, M. Zheng, J. Wu, X. Guan, A. Suwardi, Y. Li, M. Lal, G. Xie, G. Zhang, L. Zhang and J. T. L. Thong, Nanoscale, 2021, 13, 11561 DOI: 10.1039/D1NR01832A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements