Issue 19, 2021

A novel rose-with-thorn ternary MoS2@carbon@polyaniline nanocomposite as a rechargeable magnesium battery cathode displaying stable capacity and low-temperature performance

Abstract

Developing high-performance cathode materials for magnesium (Mg) batteries is of great significance. Here, a novel rose-with-thorn ternary MoS2@C@polyaniline (PANI) nanocomposite composed of carbon and PANI nanoneedles co-coated on rose-like MoS2 is developed. The conductive PANI needles on the surface of MoS2 improve the conductivity, and the inner MoS2 is wrapped by a carbon layer which is beneficial for the aniline coating. The MoS2@C@PANI-based Mg battery cathode displays a good capacity of 114 mA h g−1 after 100 cycles, and a recoverable rate-performance after repeated measurements. In addition, a stable capacity of 105 mA h g−1 when cycled at a low temperature of −5 °C is also achieved, indicating good potential for applications.

Graphical abstract: A novel rose-with-thorn ternary MoS2@carbon@polyaniline nanocomposite as a rechargeable magnesium battery cathode displaying stable capacity and low-temperature performance

Supplementary files

Article information

Article type
Paper
Submitted
16 Jun 2021
Accepted
20 Aug 2021
First published
20 Aug 2021
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2021,3, 5576-5580

A novel rose-with-thorn ternary MoS2@carbon@polyaniline nanocomposite as a rechargeable magnesium battery cathode displaying stable capacity and low-temperature performance

J. Liu, Y. Zhong, X. Li, T. Ying, T. Han and J. Li, Nanoscale Adv., 2021, 3, 5576 DOI: 10.1039/D1NA00445J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements