Issue 2, 2022

Self-powered seesaw structured spherical buoys based on a hybrid triboelectric–electromagnetic nanogenerator for sea surface wireless positioning

Abstract

The rapid development of the Internet of Things has resulted in the harvesting of distributed sustainable energy receiving increasing attention. Recently, a study on triboelectric nanogenerators (TENGs) for collecting low-frequency and irregular-amplitude ocean wave energy has attracted significant interest. Herein, a self-powered seesaw-structured spherical triboelectric–electromagnetic hybrid nanogenerator (SSTE-HNG) combining various working modes is presented for harvesting wide-frequency wave energy from different directions and self-powered sea surface wireless positioning. The electrical output performances were systematically investigated and optimized via studying the effects of the configuration parameters, including the central slider mass, oscillation frequency, and swing amplitude of each module and the entire device; the instantaneous maximum output power densities of the origami zigzag-multilayer structured (OZ), freestanding layer rolling (FL), and electromagnetic generator (EMG) modules can reach 17, 4.8, and 9.8 W m−3, respectively, at an oscillation frequency of 0.7 Hz, and around 410 LEDs can be lit when operating the SSTE-HNG. Finally, the output voltage of the SSTE-HNG was stabilized using a transistor-controlled power management circuit for charging a 4.7 mF commercial capacitor in the range of 2.7 to 3.3 V; the seesaw-structured spherical buoy was used to drive a global positioning system (GPS) module for dynamic sea surface real-time wireless positioning, and our lab building on campus was successfully located upon installing the SSTE-HNG in a water tank. This study provides an ingenious design for achieving synchronized movements among hybrid effect/mode-based generators, and a self-powered buoy with a hybrid nanogenerator for sea surface wireless positioning was realized, which has the potential to be integrated with distributed electronics, such as sensors that collect sea surface meteorological information, in the future in the field of smart marine technology.

Graphical abstract: Self-powered seesaw structured spherical buoys based on a hybrid triboelectric–electromagnetic nanogenerator for sea surface wireless positioning

Supplementary files

Article information

Article type
Paper
Submitted
17 Aug 2021
Accepted
16 Nov 2021
First published
16 Nov 2021

Energy Environ. Sci., 2022,15, 621-632

Self-powered seesaw structured spherical buoys based on a hybrid triboelectric–electromagnetic nanogenerator for sea surface wireless positioning

H. Hong, X. Yang, H. Cui, D. Zheng, H. Wen, R. Huang, L. Liu, J. Duan and Q. Tang, Energy Environ. Sci., 2022, 15, 621 DOI: 10.1039/D1EE02549J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements