Issue 13, 2021

Development of a miniature time-of-flight mass spectrometer coupled with an improved substrate-enhanced laser-induced acoustic desorption source (SE-LIAD/TOF-MS)

Abstract

A novel, compact and sensitive SE-LIAD/TOF-MS has been described. It facilitates fast sample preparation, and a full mass spectrum is acquired efficiently and sensitively. More importantly, it features the detection of non-acidic and non-basic or non-polar species, which is not suitable for determination by ESI and MALDI techniques. In this technique, standard samples, carbazole and melamine, are prepared on a Ti foil with a quartz plate attached to the backside of the Ti foil to perform a laser-induced acoustic desorption experiment (SE-LIAD) coupled to TOF-MS for analysis. Enhanced signals are observed with about 5.6 to 13.8 times higher than that obtained in the standard LIAD method, dependent on different ionization techniques. Compared to the EI spectra, the PI spectra for both species show intact and sharp molecular peaks. The limits of detection (LOD) of melamine were evaluated experimentally in the range from ∼2–6 pg (EI/MS mode) to ∼0.3–0.5 ng (VUV-SPI/MS mode). Thus, the method in this study exhibits rapid qualitative and quantitative analysis with good sensitivity, being free of the complex matrix influences.

Graphical abstract: Development of a miniature time-of-flight mass spectrometer coupled with an improved substrate-enhanced laser-induced acoustic desorption source (SE-LIAD/TOF-MS)

Supplementary files

Article information

Article type
Paper
Submitted
21 Apr 2021
Accepted
17 May 2021
First published
03 Jun 2021

Analyst, 2021,146, 4365-4373

Development of a miniature time-of-flight mass spectrometer coupled with an improved substrate-enhanced laser-induced acoustic desorption source (SE-LIAD/TOF-MS)

J. Yu, Y. Chen, J. Zhang, S. Chen, Q. Wang, Z. Qin and Z. Tang, Analyst, 2021, 146, 4365 DOI: 10.1039/D1AN00696G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements