Issue 5, 2021

Novel hydrogen chemisorption properties of amorphous ceramic compounds consisting of p-block elements: exploring Lewis acid–base Al–N pair sites formed in situ within polymer-derived silicon–aluminum–nitrogen-based systems

Abstract

This paper reports the relationship between the H2 chemisorption properties and reversible structural reorientation of the possible active sites around Al formed in situ within polymer-derived ceramics (PDCs) based on an amorphous silicon–aluminum–nitrogen (Si–Al–N) system. Al-modified polysilazane, as a ceramic precursor, was first pyrolyzed at 1000 °C under flowing ammonia to generate a Si–Al–N-based ceramic. XRD and HRTEM analyses confirmed the amorphous state of the titled ceramics. N2 adsorption–desorption isotherm measurements and HAADF-STEM observation of amorphous SiAlN indicated that Al-incorporation in the early step of the process led to the generation of micro/mesoporosity in the amorphous ceramic with nanopores of 1 to 4 nm in size. XPS and pyridine sorption infra-red spectroscopy analyses revealed the in situ formation of Lewis acidic Al sites within the amorphous Si–Al–N surface network. As a result, the Si–Al–N compound was highly moisture sensitive. Then, to investigate the intrinsic properties of the highly reactive Al sites, the Si–Al–N compound was pretreated at 400–800 °C under an inert atmosphere. Temperature-programmed-desorption (TPD)-mass spectroscopy analysis of the pre-treated sample after H2 treatment above 100 °C resulted in the detection of a broad H2 desorption peak at around 100 to 350 °C. The H2 desorption peak intensity apparently increased when H2 treatment was performed at 150 °C, and the activation energy for H2 desorption was determined to be 44 kJ mol−1. 27Al MAS NMR spectroscopic analysis for the pre-treated sample showed reversible local structure reorientation around reactive Al nuclei, and formation and deformation of 5-fold coordinated Al by H2 chemisorption and desorption, respectively. In addition, the CO2 hydrogenation reaction on the pre-treated sample was successfully demonstrated by TPD measurements after exposure to a mixed gas of H2 and CO2 with a 4 : 1 ratio at 400 °C. These results suggest that highly distorted 4-fold coordinated Al serves as a Lewis acid–base Al–N pair site to promote H2 chemisorption at T > 100 °C followed by formation of a hydrogenated 5-coordinated Al unit where CO2 hydrogenation proceeds at T = 400 °C.

Graphical abstract: Novel hydrogen chemisorption properties of amorphous ceramic compounds consisting of p-block elements: exploring Lewis acid–base Al–N pair sites formed in situ within polymer-derived silicon–aluminum–nitrogen-based systems

Supplementary files

Article information

Article type
Paper
Submitted
21 Oct 2020
Accepted
17 Dec 2020
First published
19 Dec 2020

J. Mater. Chem. A, 2021,9, 2959-2969

Novel hydrogen chemisorption properties of amorphous ceramic compounds consisting of p-block elements: exploring Lewis acid–base Al–N pair sites formed in situ within polymer-derived silicon–aluminum–nitrogen-based systems

S. Tada, N. Asakuma, S. Ando, T. Asaka, Y. Daiko, S. Honda, M. Haneda, S. Bernard, R. Riedel and Y. Iwamoto, J. Mater. Chem. A, 2021, 9, 2959 DOI: 10.1039/D0TA10271G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements