Jump to main content
Jump to site search
Access to RSC content Close the message box

Continue to access RSC content when you are not at your institution. Follow our step-by-step guide.



High-efficiency organic solar cells enabled by halogenation of polymers based on 2D conjugated benzobis(thiazole)

Author affiliations

Abstract

With the rapid development of non-fullerene acceptors, polymer donor design is critical for the realization of significantly higher power conversion efficiencies in organic solar cells (OSCs). The donor–acceptor (D–A) alternating structure is an effective strategy for the design of polymers due to its advantages in optical absorption, energy level modulation, charge mobilities, etc. Nevertheless, the current development of polymers is restricted in terms of modification of the acceptor unit. In this work, a 2D conjugated acceptor unit of benzobis(thiazole) was designed for constructing wide bandgap polymers. Fluorine and chlorine atoms were introduced into the polymers to modulate the energy levels and film morphology. The photovoltaic performances of the polymers were examined by fabricating devices employing IT-4F as the acceptor. All three polymers exhibit high short-circuit densities (JSCs) of over 21 mA cm−2 in the devices which could be attributed to high extinction coefficient and beneficial face-on orientation, as featured by the polymers based on the 2D conjugated BBT unit. Incorporation of F- or Cl-atoms effectively improved all three photovoltaic parameters open-circuit voltage (VOC), JSC and fill factor. As a result, a high power conversion efficiency of 14.8% was achieved for the chlorinated polymer (PBB-Cl). A high VOC of 0.94 V and JSC of 21.8 mA cm−2 were realized in the devices, indicating well-balanced VOC and JSC values. Dominant face-on orientation was observed for all three polymer films, which is beneficial for charge transport in the vertical direction of the substrate. Given the excellent photovoltaic performance achieved in the devices, the polymer based on the 2D conjugated BBT unit would be a very promising candidate for high performance organic solar cells.

Graphical abstract: High-efficiency organic solar cells enabled by halogenation of polymers based on 2D conjugated benzobis(thiazole)

Back to tab navigation

Supplementary files

Article information


Submitted
07 May 2020
Accepted
19 Jun 2020
First published
22 Jun 2020

J. Mater. Chem. A, 2020, Advance Article
Article type
Paper

High-efficiency organic solar cells enabled by halogenation of polymers based on 2D conjugated benzobis(thiazole)

S. Wen, Y. Li, N. Zheng, I. O. Raji, C. Yang and X. Bao, J. Mater. Chem. A, 2020, Advance Article , DOI: 10.1039/D0TA04734A

Social activity

Search articles by author

Spotlight

Advertisements