Jump to main content
Jump to site search
Access to RSC content Close the message box

Continue to access RSC content when you are not at your institution. Follow our step-by-step guide.



Alkali-cation-enhanced benzylammonium passivation for efficient and stable perovskite solar cells fabricated through sequential deposition

Author affiliations

Abstract

Two-step sequential deposition has been shown to be an effective method to improve the quality of perovskite films and performance of perovskite solar cells (PSCs). In this work, we have developed a two-step sequential deposition method, incorporating an alkali cation (e.g., Cs+) and a benzylammonium (BA+) cation into formamidinium (FA+)-based perovskite thin films for highly efficient and stable PSCs. By combining experimental characterization and theoretical calculations, we demonstrate that not only the co-incorporation of alkali cations and BA+ significantly improves the crystallinity and orientational growth of perovskite films, but also Cs+ enhances the passivation effect of BA+ ions on the perovskite surface via strengthening bonding between BA+ and perovskites. In particular, inclusion of Cs+ in BA+-passivated perovskites promotes the preferred orientation of defect-free (1 0 0) facets. As a result, we observed remarkable improvements in both open-circuit voltage and fill factor of formamidinium-benzylammonium-cesium (FABACs)-based PSCs, achieving a champion efficiency of 22.5%. More importantly, the FABAC perovskite films demonstrated superior resistance to humidity and photo-thermal stress, and the perovskite-based devices (without encapsulation) retained over 95% of the initial efficiency after exposure to air for 2 months. Manipulating the perovskite composition by combining small alkali and large organic cations in two-step sequential deposition provides an efficient and facile approach to realize highly efficient and stable perovskite devices.

Graphical abstract: Alkali-cation-enhanced benzylammonium passivation for efficient and stable perovskite solar cells fabricated through sequential deposition

Back to tab navigation

Supplementary files

Article information


Submitted
05 May 2020
Accepted
11 Aug 2020
First published
11 Aug 2020

J. Mater. Chem. A, 2020, Advance Article
Article type
Paper

Alkali-cation-enhanced benzylammonium passivation for efficient and stable perovskite solar cells fabricated through sequential deposition

J. Cao, J. Jiang, N. Li, Y. Dong, Y. Jia, S. Tao and N. Zhao, J. Mater. Chem. A, 2020, Advance Article , DOI: 10.1039/D0TA04680A

Social activity

Search articles by author

Spotlight

Advertisements