Jump to main content
Jump to site search


Acoustic interaction between 3D-fabricated cubic bubbles

Author affiliations

Abstract

Spherical bubbles are notoriously difficult to hold in specific arrangements in water and tend to dissolve over time. Here, using stereolithographic printing, we built an assembly of millimetric cubic frames overcoming these limitations. Indeed, each of these open frames holds an air bubble when immersed into water, resulting in bubbles that are stable for a long time and are still able to oscillate acoustically. Several bubbles can be placed in any wanted spatial arrangement, thanks to the fabrication process. We show that bubbles are coupled acoustically when disposed along lines, planes or in 3D arrangements, and that their collective resonance frequency is shifted to much lower values, especially for 3D arrangements where bubbles have a higher number of close neighbours. Considering that these cubic bubbles behave acoustically as spherical bubbles of the same volume, we develop a theory allowing one to predict the acoustical emission of any arbitrary group of bubbles, in agreement with experimental results.

Graphical abstract: Acoustic interaction between 3D-fabricated cubic bubbles

Back to tab navigation

Article information


Submitted
09 Dec 2019
Accepted
07 Feb 2020
First published
14 Feb 2020

Soft Matter, 2020, Advance Article
Article type
Paper

Acoustic interaction between 3D-fabricated cubic bubbles

T. Combriat, P. Rouby-Poizat, A. A. Doinikov, O. Stephan and P. Marmottant, Soft Matter, 2020, Advance Article , DOI: 10.1039/C9SM02423A

Social activity

Search articles by author

Spotlight

Advertisements