Jump to main content
Jump to site search


Correction: Application of a Sn4+ doped In2S3 thin film in a CIGS solar cell as a buffer layer

Author affiliations

Abstract

Correction for ‘Application of a Sn4+ doped In2S3 thin film in a CIGS solar cell as a buffer layer’ by SeongYeon Kim et al., Sustainable Energy Fuels, 2020, 4, 362–368.

Back to tab navigation

Article information


Submitted
17 Jan 2020
Accepted
17 Jan 2020
First published
29 Jan 2020

This article is Open Access

Sustainable Energy Fuels, 2020, Advance Article
Article type
Correction

Correction: Application of a Sn4+ doped In2S3 thin film in a CIGS solar cell as a buffer layer

S. Kim, Md. S. Mina, K. Kim, J. Gwak and J. Kim, Sustainable Energy Fuels, 2020, Advance Article , DOI: 10.1039/D0SE90016H

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. Material from this article can be used in other publications provided that the correct acknowledgement is given with the reproduced material.

Reproduced material should be attributed as follows:

  • For reproduction of material from NJC:
    [Original citation] - Published by The Royal Society of Chemistry (RSC) on behalf of the Centre National de la Recherche Scientifique (CNRS) and the RSC.
  • For reproduction of material from PCCP:
    [Original citation] - Published by the PCCP Owner Societies.
  • For reproduction of material from PPS:
    [Original citation] - Published by The Royal Society of Chemistry (RSC) on behalf of the European Society for Photobiology, the European Photochemistry Association, and RSC.
  • For reproduction of material from all other RSC journals:
    [Original citation] - Published by The Royal Society of Chemistry.

Information about reproducing material from RSC articles with different licences is available on our Permission Requests page.


Social activity

Search articles by author

Spotlight

Advertisements