Issue 49, 2020, Issue in Progress

A facile way to improve zeolite Y-based catalysts' properties and performance in the isobutane–butene alkylation reaction

Abstract

Different amounts of SiO2 were added to the Al2O3 binders to investigate the binder effect on zeolite Y-based catalysts. The added SiO2 improved the mesopore volume and acidity of the catalysts. Characterization results showed that the catalysts' acid amount increased with increasing the SiO2 amount in the binder, which achieved maximum value when 12% SiO2 was added to the binder. The doped SiO2 in Al2O3 binders improved the Al2O3 phase transformation temperature, which is crucial for Al species to break out of the phase energy and migrate into the zeolite. The lifetime of catalyst Y-Al2O3-12SiO2 is 3.7 times higher than that of Y-Al2O3-0SiO2, and the selectivity of the target products simultaneously improved by 7 percentage point. This work should bring some inspiration to the design and application of zeolite-based catalysts.

Graphical abstract: A facile way to improve zeolite Y-based catalysts' properties and performance in the isobutane–butene alkylation reaction

Article information

Article type
Paper
Submitted
26 Apr 2020
Accepted
30 May 2020
First published
05 Aug 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 29068-29076

A facile way to improve zeolite Y-based catalysts' properties and performance in the isobutane–butene alkylation reaction

S. Zhou, C. Zhang, Y. Li, B. Shao, Y. Luo and X. Shu, RSC Adv., 2020, 10, 29068 DOI: 10.1039/D0RA03762A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements