Jump to main content
Jump to site search
Access to RSC content Close the message box

Continue to access RSC content when you are not at your institution. Follow our step-by-step guide.


Issue 26, 2020
Previous Article Next Article

On demand NIR activated photopolyaddition reactions

Author affiliations

Abstract

A new approach based on a photoactivation process is proposed for the polyaddition reaction of epoxy-based systems i.e. both for epoxy/amine and epoxy/anhydride processes that are characterized by huge applications in polymers (e.g. composite and adhesive fields). Outstandingly, for the first time, near-infrared (NIR) absorbing dyes are used here for this photoactivated approach upon NIR light, providing safe irradiation conditions. Indeed, the use of NIR light remains a huge challenge i.e. the photon energy is extremely low to initiate photochemical processes. But a main advantage of the NIR light for polymer synthesis is a deeper light penetration into the material. A photoinitiating system is proposed comprising a NIR dye combined with an iodonium salt for the epoxy/amine photopolyaddition. The new proposed approach is highly robust and can be used for a broad selection of amines and epoxides. In the case of epoxy/anhydride photopolyaddition, the presence of an accelerator is required to improve the reaction. Additionally, the use of NIR light has a huge effect on the kinetics of reaction: the polymerization time is greatly improved compared to the classical reaction (e.g. in 3 hours without light vs. a few seconds or minutes upon NIR light irradiation, at room temperature). Two irradiation wavelengths are presented here: 785 nm and 1064 nm with two selected NIR dyes. The different systems presented in this paper exhibit fast polymerizations associated with full conversions. Real-time Fourier transform infrared spectroscopy is used to follow the polymerization kinetics. The applications in adhesives as well as composites are presented to highlight the interest of these NIR photoactivated processes. For the first time, on demand processes can be proposed for epoxy–amine and epoxy–anhydride polyadditions i.e. these latter systems can be polymerized within a few seconds/minutes at room temperature upon NIR stimulus vs. more than 3 h without light.

Graphical abstract: On demand NIR activated photopolyaddition reactions

Back to tab navigation

Supplementary files

Article information


Submitted
29 Apr 2020
Accepted
03 Jun 2020
First published
04 Jun 2020

Polym. Chem., 2020,11, 4250-4259
Article type
Paper

On demand NIR activated photopolyaddition reactions

H. Mokbel, F. Dumur and J. Lalevée, Polym. Chem., 2020, 11, 4250
DOI: 10.1039/D0PY00639D

Social activity

Search articles by author

Spotlight

Advertisements