Issue 35, 2020

Stable and high yield growth of GaP and In0.2Ga0.8As nanowire arrays using In as a catalyst

Abstract

We report the first investigation of indium (In) as the vapor–liquid–solid catalyst of GaP and InGaAs nanowires by molecular beam epitaxy. A strong asymmetry in the Ga distribution between the liquid and solid phases allows one to obtain pure GaP and In0.2Ga0.8As nanowires while the liquid catalyst remains nearly pure In. This uncommon In catalyst presents several advantages. First, the nanowire morphology can be tuned by changing the In flux alone, independently of the Ga and group V fluxes. Second, the nanowire crystal structure always remains cubic during steady state growth and catalyst crystallization, despite the low contact angle of the liquid droplet measured after growth (95°). Third, the vertical yield of In-catalyzed GaP and (InGa)As nanowire arrays on patterned silicon substrates increases dramatically. Combining straight sidewalls, controllable morphologies and a high vertical yield, In-catalysts provide an alternative to the standard Au or Ga alloys for the bottom-up growth of large scale homogeneous arrays of (InGa)As or GaP nanowires.

Graphical abstract: Stable and high yield growth of GaP and In0.2Ga0.8As nanowire arrays using In as a catalyst

Supplementary files

Article information

Article type
Paper
Submitted
29 May 2020
Accepted
20 Aug 2020
First published
21 Aug 2020

Nanoscale, 2020,12, 18240-18248

Stable and high yield growth of GaP and In0.2Ga0.8As nanowire arrays using In as a catalyst

A. Scaccabarozzi, A. Cattoni, G. Patriarche, L. Travers, S. Collin, J. Harmand, F. Glas and F. Oehler, Nanoscale, 2020, 12, 18240 DOI: 10.1039/D0NR04139D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements