Jump to main content
Jump to site search


Synergetic Effect in Rolling GaIn Alloy Droplets Enables Ultralow Temperature Growth of Silicon Nanowires at 70 oC on Plastics

Abstract

Ultralow temperature growth of silicon nanowires (SiNWs) directly upon cheap plastics is highly desirable for building high performance soft logics and sensors based on mature Si technology. In this work, a low temperature growth of SiNWs at only 70 oC has been demonstrated for the first time, upon polyethylene terephthalate plastics, by using gallium-indium (GaIn) alloy droplets that consume amorphous Si (a-Si) layer as precursor. The GaIn alloy droplets enable a beneficial synergetic effect that helps not only to reduce the melting temperature, but also to install a protective Gibbs adsorption layer of In atoms, which are critical to stabilize the rolling catalyst droplet, against otherwise rapid diffusion loss of Ga into a-Si matrix. Ultra-long SiNWs can be batch-produced with precise location and preferred elastic geometry that paves the way for large scale integration. At <70 oC, a transition from rolling to sprawling dynamics is observed by in situ scanning electron microscopy, caused by reduced diffusion transport and rapid formation of discrete nuclei in the alloy droplet, which undermines the basis for continuous growth of SiNWs. This unique capability and critical new understanding opens the way for integrating high quality c-Si electronics directly over flexible, lightweight and extremely low cost plastics.

Back to tab navigation

Supplementary files

Article information


Submitted
14 Feb 2020
Accepted
17 Mar 2020
First published
18 Mar 2020

Nanoscale, 2020, Accepted Manuscript
Article type
Paper

Synergetic Effect in Rolling GaIn Alloy Droplets Enables Ultralow Temperature Growth of Silicon Nanowires at 70 oC on Plastics

H. Ma, K. J. Chen, J. Xu and L. Yu, Nanoscale, 2020, Accepted Manuscript , DOI: 10.1039/D0NR01283A

Social activity

Search articles by author

Spotlight

Advertisements