Jump to main content
Jump to site search

Issue 13, 2020
Previous Article Next Article

In situ-grown organo-lead bromide perovskite-induced electroactive γ-phase in aerogel PVDF films: an efficient photoactive material for piezoelectric energy harvesting and photodetector applications

Author affiliations

Abstract

The unique combination of piezoelectric energy harvesters and light detectors progressively strengthens their application in the development of modern electronics. Here, for the first time, we fabricated a polyvinylidene fluoride (PVDF) and formamidinium lead bromide nanoparticle (FAPbBr3 NP)-based composite aerogel film (FAPbBr3/PVDF) for harvesting electrical energy and photodetector applications. The uniform distribution of FAPbBr3 NPs in FAPbBr3/PVDF was achieved via the in situ synthesis of FAPbBr3 NPs in the PVDF matrix, which led to the stabilization of the γ-phase. The freeze-drying process induced an interconnected porous architecture in the composite film, making it more sensitive to small mechanical stimuli. Owing to this unique fabrication technique, the constructed aerogel film-based nanogenerator (FPNG) exhibited an output voltage and current of ∼26.2 V and ∼2.1 μA, respectively, which were 5-fold higher than that of the nanogenerator with the pure PVDF film. Also, the sensitivity of FPNG upon the irradiation of light was demonstrated by the output voltage reduction of ∼38%, indicating its capability as a light sensing device. Furthermore, the prepared FAPbBr3/PVDF composite was found to be an efficient candidate for light detection applications. A simple planar photodetector was fabricated with the 8.0 wt% FAPbBr3 NP-loaded PVDF composite, which displayed very high responsivity (8 A/W) and response speed of 2.6 s. Thus, this exclusive combination of synthesis and fabrication for the preparation of electro-active films opens a new horizon in the piezoelectric community for effective energy harvesting and light detector applications.

Graphical abstract: In situ-grown organo-lead bromide perovskite-induced electroactive γ-phase in aerogel PVDF films: an efficient photoactive material for piezoelectric energy harvesting and photodetector applications

Back to tab navigation

Supplementary files

Article information


Submitted
05 Jan 2020
Accepted
29 Feb 2020
First published
02 Mar 2020

Nanoscale, 2020,12, 7214-7230
Article type
Paper

In situ-grown organo-lead bromide perovskite-induced electroactive γ-phase in aerogel PVDF films: an efficient photoactive material for piezoelectric energy harvesting and photodetector applications

S. K. Si, S. Paria, S. K. Karan, S. Ojha, A. K. Das, A. Maitra, A. Bera, L. Halder, A. De and B. B. Khatua, Nanoscale, 2020, 12, 7214
DOI: 10.1039/D0NR00090F

Social activity

Search articles by author

Spotlight

Advertisements