Issue 3, 2020

Elemental screening of plant-based foods by slurry nebulization ICP-MS

Abstract

Screening of nutritional and toxic elements in plant-based foods is very important for human health. A reliable solid sampling inductively coupled plasma-mass spectrometry (ICP-MS) method based on the direct introduction of food particle slurries for the simultaneous determination of 16 elements (K, Ca, Mg, Fe, Sr, Zn, Cu, As, Pb, Cr, V, Li, Ti, Rb, Ge, and Ba) was developed. Sample powders were dispersed in 0.5% polyethylene imine by wet-grinding with a tissue cell-destroyer, and 90% of the particles in the slurry were found to be less than 0.8 μm in diameter during the 90 s milling. The feasibility of using direct calibration with simple aqueous standards in slurry nebulization ICP-MS analysis was evaluated by studying the transportation and ionization behavior of particles with different sizes. The upper limits of particle sizes for the efficient transportation and complete ionization were 8.5 μm and 3–4 μm, respectively. In addition, an extended dynamic range technique was developed to simultaneously analyze the major and trace elements in one analysis. Satisfactory recovery (93–106%) and precision (0.3–8.6%, RSD, n = 3) were verified by analyzing a series of food certified reference materials.

Graphical abstract: Elemental screening of plant-based foods by slurry nebulization ICP-MS

Supplementary files

Article information

Article type
Paper
Submitted
10 Oct 2019
Accepted
20 Jan 2020
First published
20 Jan 2020

J. Anal. At. Spectrom., 2020,35, 592-599

Elemental screening of plant-based foods by slurry nebulization ICP-MS

H. Cui, W. Guo, L. Jin, Y. Peng and S. Hu, J. Anal. At. Spectrom., 2020, 35, 592 DOI: 10.1039/C9JA00340A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements