Issue 1, 2020

A sequential membrane bioreactor followed by a membrane microalgal reactor for nutrient removal and algal biomass production

Abstract

A hybrid process combining a single compartment aerobic membrane bioreactor (MBR) and a membrane microalgal reactor (MMR) was evaluated for nutrient removal and microalgal biomass production. When operated without biomass extraction, the microalgal biomass in the MMR reached 920 mg L−1 on day 18 and then collapsed, rendering nutrient removal ineffective. Stable operation of the MMR was achieved by regular biomass extraction (i.e. 1/30 of the microalgal biomass in the reactor daily). The biomass production at steady state was approximately 26 g m−3 d−1. The NO3 and PO43− uptake values by microalgae were 4.0 ± 1.1 and 1.5 ± 0.9 g m−3 d−1, respectively. A facile flocculation and separation technique capable of recovering 98% microalgal biomass was demonstrated. Although the hybrid process can significantly enhance nutrient removal and biomass production, further research is needed to intensify the microalgal growth rate. At the current microalgal growth rate, a large MMR volume (37 times that of the MBR) is necessary for synchronous operation.

Graphical abstract: A sequential membrane bioreactor followed by a membrane microalgal reactor for nutrient removal and algal biomass production

Article information

Article type
Paper
Submitted
25 Sep 2019
Accepted
12 Nov 2019
First published
13 Nov 2019

Environ. Sci.: Water Res. Technol., 2020,6, 189-196

A sequential membrane bioreactor followed by a membrane microalgal reactor for nutrient removal and algal biomass production

L. N. Nguyen, M. V. Truong, A. Q. Nguyen, M. A. H. Johir, A. S. Commault, P. J. Ralph, G. U. Semblante and L. D. Nghiem, Environ. Sci.: Water Res. Technol., 2020, 6, 189 DOI: 10.1039/C9EW00851A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements