Jump to main content
Jump to site search


A membraneless gas-trapping device for cyanide detection and quantification

Abstract

A novel device for trapping gaseous compounds was invented and employed to create a user-friendly cyanide test kit for aqueous solutions. This specially designed device is housed in a small polypropylene straw with one end sealed. The device is packaged with chemicals to liberate, trap and quantify hydrogen cyanide gas. Piercing a pinhole near the bottom of the device and lowering it into the sample allows the sample to enter the device. When a sufficient amount of sample has entered the device, the device is sealed by wetting of the cotton with propylene glycol inside the device. The hydrogen cyanide gas is generated by reacting the sample with sulfuric acid inside the device. The produced hydrogen cyanide is trapped by potassium hydroxide, and detected by the reaction between p-nitrobenzaldehyde and o-nitrobenzene, using cyanide ion as a catalyst, to produce a purple compound of o-nitrophenyl hydroxylamine dianion. Within 10 minutes, this method provides a linear working range of 0.02-0.20 mg/L CN-. The calibration line has the coefficient of determination of 0.99. Moreover, this device does not require any addition of chemicals by the users, thus increasing its safety and ease of use. The developed device was applied to measure the concentration of cyanide in natural water, fresh bamboo shoot, and fruit juice.

Back to tab navigation

Supplementary files

Article information


Submitted
06 Feb 2020
Accepted
09 Mar 2020
First published
10 Mar 2020

Anal. Methods, 2020, Accepted Manuscript
Article type
Paper

A membraneless gas-trapping device for cyanide detection and quantification

C. Lorpaiboon, W. Lorpaiboon and M. Dangkulwanich, Anal. Methods, 2020, Accepted Manuscript , DOI: 10.1039/D0AY00245C

Social activity

Search articles by author

Spotlight

Advertisements