Jump to main content
Jump to site search
SCHEDULED MAINTENANCE Close the message box

Maintenance work is planned for Monday 16 August 2021 from 07:00 to 23:59 (BST).

Website performance may be temporarily affected and you may not be able to access some PDFs or images. If this does happen, refreshing your web browser should resolve the issue. We apologise for any inconvenience this might cause and thank you for your patience.


Issue 5, 2020

COvalent monolayer patterns in Microfluidics by PLasma etching Open Technology – COMPLOT

Author affiliations

Abstract

Plasma microcontact patterning (PμCP) and replica molding were combined to make PDMS/glass microfluidic devices with β-cyclodextrin (β-CD) patterns attached covalently on the glass surface inside microchannels. The supramolecular reactivity, reusability and association constant of β-CD with Cy5–Ad2 was tested by analyzing signal-to-noise ratios of patterns vs. spacing with fluorescence microscopy.

Graphical abstract: COvalent monolayer patterns in Microfluidics by PLasma etching Open Technology – COMPLOT

Supplementary files

Article information


Submitted
29 Nov 2019
Accepted
12 Jan 2020
First published
13 Jan 2020

This article is Open Access

Analyst, 2020,145, 1629-1635
Article type
Communication

COvalent monolayer patterns in Microfluidics by PLasma etching Open Technology – COMPLOT

S. B. J. Willems, J. Zegers, A. Bunschoten, R. M. Wagterveld, F. W. B. van Leeuwen, A. H. Velders and V. Saggiomo, Analyst, 2020, 145, 1629 DOI: 10.1039/C9AN02407G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.


Social activity

Search articles by author

Spotlight

Advertisements