Issue 10, 2019

Novelty of iron-exchanged heteropolyacid encapsulated inside ZIF-8 as an active and superior catalyst in the esterification of furfuryl alcohol and acetic acid

Abstract

Metal (M) exchanged dodecatungstophosphoric acid (DTP) encapsulated inside ZIF-8 framework were synthesized by an in situ method to produce a variety of active catalysts. Thus, M-DTP@ZIF-8 (M = Co, Zr, Al and Fe) were used for the formation of furfuryl acetate from the esterification of furfuryl alcohol and acetic acid. The highest activity of the catalyst was found for Fe-DTP@ZIF-8, which was also the catalyst with the highest number of acidic sites. DTP showed retention of the Keggin structure after exchanging protons with the metal ions, and upon encapsulation of ions the rhombic structure of ZIF-8 was also retained. Fe-DTP@ZIF-8, the most active catalyst, possessed a very high surface area (1114 m2 g−1) and the highest acidity (0.61 mmol g−1). Fresh and spent catalyst was characterized using NH3-TPD, powder XRD, DRIFTS, SEM, HRTEM and TGA. A kinetic model was developed based on the LHHW (Langmuir–Hinshelwood–Hougen–Watson) mechanism and activation energy was calculated for both the steps as 38.6 kJ mol−1 and 65.2 kJ mol−1, which proved that the esterification reaction was much faster than the self-etherification of furfuryl alcohol.

Graphical abstract: Novelty of iron-exchanged heteropolyacid encapsulated inside ZIF-8 as an active and superior catalyst in the esterification of furfuryl alcohol and acetic acid

Supplementary files

Article information

Article type
Paper
Submitted
21 Apr 2019
Accepted
18 Jun 2019
First published
18 Jun 2019

React. Chem. Eng., 2019,4, 1790-1802

Novelty of iron-exchanged heteropolyacid encapsulated inside ZIF-8 as an active and superior catalyst in the esterification of furfuryl alcohol and acetic acid

R. S. Malkar, H. Daly, C. Hardacre and G. D. Yadav, React. Chem. Eng., 2019, 4, 1790 DOI: 10.1039/C9RE00167K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements