Issue 24, 2019

A microfluidic alternating-pull–push active digitization method for sample-loss-free digital PCR

Abstract

Digital polymerase chain reaction (dPCR) is a powerful tool for genetic analysis, providing superior sensitivity and accuracy. In many applications that demand minuscule reaction volumes, such as single cell analysis, efficient and reproducible sample handling and digitization is pivotal for accurate absolute quantification of targets, but remains a significant technical challenge. In this paper, we described a robust and flexible microfluidic alternating-pull–push active digitization (μAPPAD) strategy that confers close to 100% sample digitization efficiency for microwell-based dPCR. Our strategy employs pneumatic valve control to periodically manipulate air pressure inside the chip to greatly facilitate the vacuum-driven partition of solution into microwells, enabling efficient digitization of a small-volume solution with significantly reduced volume variability. The μAPPAD method was evaluated on both tandem-channel and parallel-channel chips, which achieved a digitization efficiency of 99.5 ± 0.3% and 94.6 ± 0.9% within 10.5 min and 2 min, respectively. To assess the analytical performance of the μAPPAD chip, we calibrated it for absolution dPCR quantitation of λDNA across a range of concentrations. The results obtained with our chip matched well with the theoretical curve computed from Poisson statistics. Compared to the existing methods for highly efficient sample digitization, not only does our technology greatly reduce the constraints on microwell geometries and channel design, but also benefits from the intrinsic amenability of the pneumatic valve technique with device integration and automation. Thus we envision that the μAPPAD technology will provide a scalable and widely adaptable platform to promote the development of advanced lab-on-a-chip systems integrating microscale sample processing with dPCR for a broad scope of applications, such as single cell analysis of tumor heterogeneity and genetic profiling of circulating exosomes directly in clinical samples.

Graphical abstract: A microfluidic alternating-pull–push active digitization method for sample-loss-free digital PCR

Supplementary files

Article information

Article type
Paper
Submitted
18 Sep 2019
Accepted
05 Nov 2019
First published
06 Nov 2019

Lab Chip, 2019,19, 4104-4116

A microfluidic alternating-pull–push active digitization method for sample-loss-free digital PCR

X. Zhou, G. C. Ravichandran, P. Zhang, Y. Yang and Y. Zeng, Lab Chip, 2019, 19, 4104 DOI: 10.1039/C9LC00932A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements