Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance work on Wednesday 27th March 2019 from 11:00 AM to 1:00 PM (GMT).

During this time our website performance may be temporarily affected. We apologise for any inconvenience this might cause and thank you for your patience.



Tailoring surface acoustic wave atomisation for cryo-electron microscopy sample preparation

Author affiliations

Abstract

Surface acoustic wave (SAW) atomisation has been widely explored for use in pharmacological delivery, hence performance is characterised predominately in terms of droplet size and maximum delivery of fluid, to ensure sufficient dosage is delivered to the right location. For the application of cryo electron microscopy grid preparation, however, what is required is the transfer of very little fluid onto the grid in a well-defined manner. To meet this requirement, the analysis of SAW atomisation needs to focus on very different characteristics. Specifically, we examine the aerosol jet geometry, in terms of width, cone angle, and elevation angle, and its stability at low power, and hence low flow rates. The variables used are the width and the location of the channel delivering the fluid to the site of atomization. From the experiments, it is observed that we can reach a flowrate as low as 0.55 μl s−1 with reasonable aerosol jet stability, a jet width of 0.5 mm wide and an elevation angle variation as low as 2°.

Graphical abstract: Tailoring surface acoustic wave atomisation for cryo-electron microscopy sample preparation

Back to tab navigation

Supplementary files

Publication details

The article was received on 11 Dec 2018, accepted on 01 Mar 2019 and first published on 04 Mar 2019


Article type: Paper
DOI: 10.1039/C8LC01347K
Citation: Lab Chip, 2019, Advance Article

  •   Request permissions

    Tailoring surface acoustic wave atomisation for cryo-electron microscopy sample preparation

    D. Ashtiani, A. de Marco and A. Neild, Lab Chip, 2019, Advance Article , DOI: 10.1039/C8LC01347K

Search articles by author

Spotlight

Advertisements