Jump to main content
Jump to site search


Digital nanoliter to milliliter flow rate sensor with in vivo demonstration for continuous sweat rate measurement

Author affiliations

Abstract

Microfluidic flow rate sensors have constraints in both detection limits and dynamic range, and are not often easily integrated into lab-on-chip or wearable sensing systems. We constructed a flow rate sensor that easily couples to the outlet of a microfluidic channel, and measures the flow rate by temporarily shorting periodic droplets generated between two electrodes. The device was tested in a dynamic range as low as 25 nL min−1 and as high as 900 000 nL min−1 (36 000× range). It was tested to continuously operate up to ∼200 hours. The device is also simple to fabricate, requiring inexpensive parts, and is small enough to be integrated into wearable devices. The required input pressure is as low as 370 Pascals. An ultra-low flow rate application was demonstrated for wearable sweat biosensing where sweat generation rates (nL min−1 per gland) were accurately measured in human subjects. The digital nanoliter device provides real-time flow rates for sweat rates and may have other applications for low flow rates in microfluidic devices.

Graphical abstract: Digital nanoliter to milliliter flow rate sensor with in vivo demonstration for continuous sweat rate measurement

Back to tab navigation

Supplementary files

Publication details

The article was received on 12 Sep 2018, accepted on 20 Nov 2018 and first published on 07 Dec 2018


Article type: Paper
DOI: 10.1039/C8LC00968F
Citation: Lab Chip, 2019, Advance Article
  •   Request permissions

    Digital nanoliter to milliliter flow rate sensor with in vivo demonstration for continuous sweat rate measurement

    J. Francis, I. Stamper, J. Heikenfeld and E. F. Gomez, Lab Chip, 2019, Advance Article , DOI: 10.1039/C8LC00968F

Search articles by author

Spotlight

Advertisements