Jump to main content
Jump to site search
Access to RSC content Close the message box

Continue to access RSC content when you are not at your institution. Follow our step-by-step guide.


Issue 4, 2019
Previous Article Next Article

Resource recovery and wastewater treatment modelling

Author affiliations

Abstract

Traditional wastewater treatment plants (WWTPs) are increasingly regarded as water resource recovery facilities (WRRFs), reflecting the value of water, nutrients, energy and other resources, besides ensuring the required effluent quality. Resource recovery techniques involve biochemical, physical and physico-chemical processes, and even previously unexploited biological conversions. Biopolymer and bioplastic production also reveal the remarkable potential present in our microbial cultures. Models have demonstrated their usefulness to optimize WWTP operation to achieve better effluent quality at lower costs; they also constitute a useful tool to support the transition of WWTPs into WRRFs that maximize the valorization of products recovered from wastewater. In this paper, the extent to which the new techniques and unit processes applied for resource recovery could be modelled with conventional activated sludge models (ASMs) and additional modelling challenges being faced are discussed while providing recommendations of potential approaches to address current modelling research gaps.

Graphical abstract: Resource recovery and wastewater treatment modelling

Back to tab navigation

Article information


Submitted
26 Oct 2018
Accepted
08 Feb 2019
First published
11 Feb 2019

Environ. Sci.: Water Res. Technol., 2019,5, 631-642
Article type
Perspective

Resource recovery and wastewater treatment modelling

K. Solon, E. I. P. Volcke, M. Spérandio and M. C. M. van Loosdrecht, Environ. Sci.: Water Res. Technol., 2019, 5, 631
DOI: 10.1039/C8EW00765A

Social activity

Search articles by author

Spotlight

Advertisements